Table Of Contents
Latest update [menu]
I have fix app description information.
Description [menu]
CCNA Routing Labs lite version include 54 CCNA Labs for free use , when you upgrade to premium , you can use total 73 Labs !
IP Service : DHCP /NAT /ACL/ VRRP / HSRP / IP SLA / GLBP / PPP / NTP
Routing Protocols : EIGRP / OSPF / RIP / BGP / Tacacs+ / Radius / Telnet / SSH / L2 , L3 EtherChannel for PAgP and LACP
Hello, everyone: If you find any program bugs, or any Lab content error ,please mail to [email protected] , thank you!
(1) IP Service 1 : (free use)
Dynamic NAT
Static NAT
PAT
Extended ACL
Standard ACL
Name ACL
Time ACL
IPv6 ACL(1)
IPv6 ACL(2)
(2)IP Service 2 : (free use)
VRRP (track on serial)
HSRP (track on serial)
VRRP/IP SLA (track on ethernet)
HSRP/IP SLA (track on ethernet)
GLBP(Gateway Load Balance Protocol)
DHCP server
DHCP relay
Enable NAT on DHCP router
DHCPv6 auto config
(3)IP Service 3 : (free use)
DHCPv6 stateless
DHCPv6 stateful
PPP CHAP authentication
PPP PAP authentication
PPP multilink
GRE tunnel
NTP
NTP authentication
(4)IP Routing 1: (free use)
EIGRP manual summary
EIGRP unequal cost load balance
EIGRP passive interface
EIGRPv6
EIGRP authentication
EIGRPv6 authentication
EIGRP redistribution OSPF Route
EIGRP redistribution RIP Route
EIGRP redistribution static Route
(5)IP Routing 2: (free use)
OSPF normal area
OSPF stub area
OSPF totally stub area
OSPF NSSA area
OSPF totally NSSA area
OSPF virtual link
OSPFv3 (OSPF for IPv6)
OSPF authentication (by area)
OSPF authentication (by interface)
(6)IP Routing 3: (Free / Premium )
OSPF route summary on ABR (Free)
OSPF route summary on ASBR (Free)
OSPF redistribution RIP route (Free)
OSPF redistribution static route (Free)
RIP route filter (Free)
OSPFv3 virtual link (Premium)
Policy base route (Premium)
RIPng (Premium)
Inter VLAN Routing (Premium)
(7)IP Routing 4: (Premium only)
BGP authentication (Premium)
BGP local preference (1) : config global (Premium)
BGP local preference (2) : config network prefix (Premium)
BGP MED (Premium)
BGP neighbor (Premium)
BGP neighbor use loopback interface (Premium)
BGP summary address (Premium)
(8)Switch 1: (Free / Premium )
Tacacs+ on switch (Free)
Tacacs+ on router (Free)
Radius on switch (Premium)
Radius on router (Premium)
Reset router (Premium)
Reset switch (Premium)
Config Telnet (Premium)
Config SSH (Premium)
Restricted IP access (Premium)
(9)Switch 2: (Free / Premium )
L2 EtherChannel PAgP (Free)
L3 EtherChannel PAgP (Free)
L2 EtherChannel LACP (Premium)
L3 EtherChannel LACP (Premium)
How to install CCNA Labs Routing Lite APK for Android [menu]
Download CCNA Labs Routing Lite APK file (com.thdc.chunnanlin.ccna_lite_20_35508375.apk) from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.thdc.chunnanlin.ccna_lite_20_35508375.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install CCNA Labs Routing Lite APK on Windows 7/8/10 or MAC PC? [menu]
Download CCNA Labs Routing Lite APK file(com.thdc.chunnanlin.ccna_lite_20_35508375.apk) from SameAPK.com to your PC (ex: /Users/xxx/Downloads/(com.thdc.chunnanlin.ccna_lite_20_35508375.apk)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file com.thdc.chunnanlin.ccna_lite_20_35508375.apk on Emulator screen
CCNA Labs Routing Lite APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.