Table Of Contents
![Energy Meter Accuracy Calculator poster](/img/1.gif)
Latest update [menu]
Added compatibility with Android Q
Description [menu]
This application can be used to calculate the accuracy of kWh energy meter. Just note down the meter constant (imp/kWh or rev/kWh) from meter and connect a known test load with meter. Start the timer and start counting impulses on the meter. After some time, stop the timer and enter the value of impulses counted. You can also increment the impulses value by pressing the "Count Impulse" button while the timer is running. The results can be calculated by pressing the "Calculate" button. It calculates the number of impulses at 100% accuracy and also calculates the percentage error of meter. The meter can either be fast or slow. The 5% error is acceptable in many states.
Instructions on how to use the app:
1. Note down the meter constant (imp/kWh) from the meter nameplate.
2. Connect a test load with the meter and measure its kW value with some measuring tool.
3. Start the timer by pressing the "Start" button.
4. Once the timer starts, observe the impulses on meter. Press the "Count Impulse" button each time an impulse is observed on meter.
5. After some time stop the timer and stop counting impulses.
6. Press the "Calculate" button to see the results.
For suggestions:
E-mail: [email protected]
How to install Energy Meter Accuracy Calculator APK for Android [menu]
Download Energy Meter Accuracy Calculator APK file (com.hsn.powermeter_9_3844939.zip) from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Download Split APKs Installer (SAI)
- Download and unzip file you already downloaded (com.hsn.powermeter_9_3844939.zip)
- Open Split APKs Installer and follow steps on this app.
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Energy Meter Accuracy Calculator APK on Windows 7/8/10 or MAC PC? [menu]
Download Energy Meter Accuracy Calculator APK file(com.hsn.powermeter_9_3844939.zip) from SameAPK.com to your PC (ex: /Users/xxx/Downloads/(com.hsn.powermeter_9_3844939.zip)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Download and unzip file com.hsn.powermeter_9_3844939.zip.
- Using ADB or Split APKs Installer same as install for Android.
Energy Meter Accuracy Calculator APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.