Table Of Contents
Latest update [menu]
Version 2.0 updated.
Description [menu]
This application will only work in conjunction with the Esp8266-12 Test Board from AI-Thinker with the factory firmware installed.
The app uses the builtin Esp8266-12 HTTP server to send and receive data using the defined JSON API. This means it can be used to switch on / off the existent LEDs, which will also set the GPIO pins Low / High. The app also allows the configuration of the external WiFi settings, which can be used to connect the Esp8266-12 module to your wireless Router / AP.
If you have never configured the external WiFi in your Esp8266-12 module, you may configure it with this app. First you should connect to the Internal network, which should be something like "AI-THINKER_XXXXX" (default password "ai-thinker") and next go to the WiFi Settings and enter the wireless Router / AP SSID and password. If your wireless Router / AP is configured with WEP authentication you must enter the HEX WEP password.
In some Esp8266-12 modules, the connections for the Red and Green LEDs come swapped from factory. If this is your case, enable the Red / Green LED swap in the app preferences.
How to install IoT Demo App APK for Android [menu]
Download IoT Demo App APK file from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install IoT Demo App APK on Windows 7/8/10 or MAC PC? [menu]
Download IoT Demo App APK file from SameAPK.com to your PC (ex: /Users/xxx/Downloads/), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
