Table Of Contents
Latest update [menu]
- stop watch running at start or finish line
- sensibility setting of light/camera detection changed
- counter of walkthroughs
- communication protocol changed
Description [menu]
Light Barrier
!!! This is the DEMO version for the App "Lichtschranke - Light Barrier".
With the DEMO version you can try the app with minimal settings, to
check if the app conforms your needs. Have fun.
One or two devices are neccessary. Two mobile device: A start giver, which gives an acustic shoot sound and send the start to the device at the finish line and the mobile device at the finish line, which registrate the walkthrough. So it is possible to estimate the time between start and finish line. (Tested on Android 2.3.3 device, Samsung Ace). TheApp can be used over Wifi or Wifi Direct (Android 4.0 verfügbar).
One Device: You can use on device at the finish line. If you connect a wireless speaker which only transfers the starting shot/sound to the starting running point. The device is
Countdown giver and Lichtschranke at the same time. For this function you just need to set the Server IP '127.0.0.1'.
For queries you can contact me.
This app is constantly revised/improved if bugs or new ideas are there.
For handling watch the video.
Best regards.
Quick Howto:
(1) The Light Barrier at the finish line is used as Lichtschranke/Server. Click on "Run as Lichtschranke". The Walkthrought is detected by the change of brightness in front of the camera while walking through. The brightness calculation is estimated in the pixel top right corner of the camera. Is the top right corner focused on a white plane the value is max 256. A black plane has the value 0. Try it. In the settings in the field "Sensibility" you can setup the brightness, what can be expected in the time of walk through. "Detection Interval" shows the interval in which a walkthrough is detected.
(2) The start-device is used for giving the start signal. Take a look in the settings of Wifi of the Lichtschranke/Server to set this IP number in the field "server ip". Click on "Run Countdown". When the countdown is finished the Lichtschranke/Server gets the start signal via Wifi.
Hint:
+ For a perfect walkthrough signal it might be helpful to use a flashlight
which is focosed/lightening into the camera. So the walkthrough can be detected much better (see last picture for an example)
+ In modus 'stopover/continuous time' you can stop countdown time by touching Countdown-time 3-4 sec. long and the countdown get stopped.
+ Fix the screen of app vertical. The behaviour was not tested if screen rotates while application.
How to install Light Barrier 2.0 (DEMO) APK for Android [menu]
Download Light Barrier 2.0 (DEMO) APK file (com.dk.Lichtschranke_LightBarrier_20_demo_2_284233.apk) from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap the APK file you downloaded (com.dk.Lichtschranke_LightBarrier_20_demo_2_284233.apk)
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Light Barrier 2.0 (DEMO) APK on Windows 7/8/10 or MAC PC? [menu]
Download Light Barrier 2.0 (DEMO) APK file(com.dk.Lichtschranke_LightBarrier_20_demo_2_284233.apk) from SameAPK.com to your PC (ex: /Users/xxx/Downloads/(com.dk.Lichtschranke_LightBarrier_20_demo_2_284233.apk)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Simple install APK on PC by drag and drop file com.dk.Lichtschranke_LightBarrier_20_demo_2_284233.apk on Emulator screen
Light Barrier 2.0 (DEMO) APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.
