Table Of Contents
Latest update [menu]
* Betaflight 4.0.0 support
* ButterFlight 3.6.4 support
* Cleanflight 2.5.0 support
* Please feel free to report any issues or feedback to [email protected]
Description [menu]
PIDflight VTx provides a simple interface to adjust your TrampHV or TBS Unify Pro video transmitter settings such as band, channel, power and pit mode.
Flight controller firmware supporting VTx control:
- Betaflight 3.1.0+
- Cleanflight 2.0.0+
- iNav 1.8.0+
- ButterFlight 3.3.0+
- KISS 1.3RC10 (v1.09) and above
*** IMPORTANT ***
This requires the following prerequisites:
- Flight controller firmware running Betaflight 3.1.0+, Cleanflight 2.0.0+, iNav 1.8.0+ or KISS 1.3RC10 (v1.09) and above.
- USB OTG enabled device, please feel free to try the free "PIDflight" tuning app first to confirm USB OTG connectivity to your device.
- Your TrampHV telemetry or TBS SmartAudio wire from the VTx is wired to a TX pin on an available UART port.
Betaflight/Cleanflight/iNav/ButterFlight users, please ensure you select "IRC Tramp" or "TBS SmartAudio" in "Peripheral" section for your UART port under the "Ports" tab of the Configurator.
KISS users, please ensure you select either "IRC Tramp" or "TBS Unify" from the VTx section of the "Advanced" tab in the KISS GUI.
How to install PIDflight VTx APK for Android [menu]
Download PIDflight VTx APK file from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install PIDflight VTx APK on Windows 7/8/10 or MAC PC? [menu]
Download PIDflight VTx APK file from SameAPK.com to your PC (ex: /Users/xxx/Downloads/), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)