Table Of Contents
Latest update [menu]
New Publish
Description [menu]
The ST-4002A uses an Android device as an external GPS for the transceiver.
You connect the Android device to the [DATA] jack of the transceiver and output the GPS data to the transceiver, and then you can use it as an external GPS for the transceiver.
Refer to the INSTRUCTIONS for details.
Device requirements:
1 Android 7.0 or later
2 USB On-The-Go (OTG) host function
Supported transceiver
This app can be used with a transceiver that supports external GPS input through the [DATA] jack.
- Icom IC-7100
- Icom IC-9100
- Icom IC-9700
- Icom ID-4100
- Icom ID-5100, and so on
*An OPC-2350LU data communication cable is also required.
NOTE
- Icom does not guarantee that the ST-4002A works on all Android devices. It may not work properly, depending on the OS version, installed applications, or other reasons.
- You cannot use this app on Android devices that cannot obtain location information. In addition, if the device is without GPS, it may not output the correct position.
- You may not use this app in the Power Save mode (the name varies depending on the manufacturer of the Android device) or when the screen is OFF
- The ST-4002A may not be usable, even if your Android device supports the USB OTG host function.
- Remove the data communication cable when you don't use it to reduce the Android device's power consumption
How to install ST-4002A APK for Android [menu]
Download ST-4002A APK file (jp.co.icom.st4002a_9_2937481.zip) from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Download Split APKs Installer (SAI)
- Download and unzip file you already downloaded (jp.co.icom.st4002a_9_2937481.zip)
- Open Split APKs Installer and follow steps on this app.
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install ST-4002A APK on Windows 7/8/10 or MAC PC? [menu]
Download ST-4002A APK file(jp.co.icom.st4002a_9_2937481.zip) from SameAPK.com to your PC (ex: /Users/xxx/Downloads/(jp.co.icom.st4002a_9_2937481.zip)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Download and unzip file jp.co.icom.st4002a_9_2937481.zip.
- Using ADB or Split APKs Installer same as install for Android.
ST-4002A APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 32 bit device (most Emulator using 32bit arch CPU)
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
Everything is good.