Table Of Contents
Latest update [menu]
- Support for Model 3/Y
- Custom user definable screens. 32 samples included. Supports gauges with resettable min/max markers.
- "Trip" Custom screen to capture and display trip information.
- Supports OBDLink LX/MX/MX+ "ST" commands for much higher sample rates. Recommended OBDII Adapter.
- Fix incorrect values due to Tesla firmware 2020.20.5 update
- Updated Help. PDF included in TM-Spy/DOCUMENTS folder.
- Supports English, Japanese, German, French, Chinese, Russian and Arabic
Description [menu]
TM-Spy uses a standard ELM 327 type Bluetooth or WiFi OBDII adapter to decode information from the CAN service plug located below the center display screen. Check the internet for how to access this cable and the specifications for the custom adapter cable required to go from the Tesla 12 pin connector to the standard 16 pin OBDII connector which the ELM 327 adapter plugs into.
Information Displayed
* Individual Cell voltages (84 or 96 depending of size of battery)
* Maximum, minimum cell voltages and delta between the two.
* Histogram showing how well balanced the battery pack is
* Battery pack temperature sensor readings. 16 pairs of readings (inlet/outlet coolant temperatures)
* Total battery voltage and current during driving and charging
* Pack capacity and remaining energy in kWh
* Mileage driven on current battery pack (if you swapped packs the pack mileage will be different for the dash display)
* Lifetime battery discharge and charge energy in kWh
The 24 pack temperatures are grouped into pairs with one being the temperature of the coolant inlet port and the other the temperature of the outlet port. The difference between these two temperatures indicates whether the pack is being cooled or heated.
How to install TM-Spy APK for Android [menu]
Download TM-Spy APK file from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install TM-Spy APK on Windows 7/8/10 or MAC PC? [menu]
Download TM-Spy APK file from SameAPK.com to your PC (ex: /Users/xxx/Downloads/), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
