Table Of Contents
Latest update [menu]
This version support 64 bit.
Fixed: Network ID had no effect, and the connection was treated as a Direct connection.
Description [menu]
The Remote Operator app enables you to remotely access your Unitronics controllers using your smartphone and tablet.
- Remotely access Vision and Samba controllers via Internet or wireless LAN connection
- Control and monitor automation and machines remotely
- View operational conditions, Alarms, data, and Trends in real time
- ‘Full Control’ or ‘View Only’ work mode selection
- Pinch to zoom
- Favorites and Groups
- Shareable Configurations - send your Favorites and Groups to another device
Requirements:
Mobile device minimum OS version: Android 4.0+, API 14+
Supported Controllers:
V350, V430, V700, V570, V1040, V1210, SM35, SM43, SM70
Information
Developer/publisher: Unitronics (1989) (R"G) Ltd
Support: http://www.unitronics.com/support
View and Download the QuickStart Guide:
http://www.unitronics.com/Unitronics_Apps/Unitronics_Remote_Operator_AppQuickStart.pdf
*First-time Use
1. Open Remote Operator.
2. Create a Password, set up password recovery.
3. Tap OK, the app opens an empty Favorites screen.
**Adding PLCs to Favorites/Groups
Tap + to add PLCS, configure controllers and communication channels.
Enter:
- PLC Nickname
Optional. Must be unique.
- PLC Name
Must exactly match the actual PLC Name, including capitals.
- IP Address/Host, TCP and Port
Defines communication channel
NOTE:
1. IP Address & Port MUST be a unique combination.
2. Format: Incorrect 10.000.000.037 Correct 10.0.0.37.
- Group Name
Tap to open the Group list.
Add to Favorites: When checked, the PLC is added to the Favorites list as well as a Group.
When finished, if desired, tap Check PLC Connection.
Tap OK to save the PLC and return to Favorites.
To delete a PLC, press and hold it to reveal the available options.
*Adding Groups
1. In the Favorites screen, tap <=(left-facing arrow) to open Groups.
2. Tap + to add a Group.
3. Enter Group Name and Comment.
4. Tap OK to add the Group.
5. Tap <= to return to Favorites.
6. Tap More (three bars, upper right side of the screen) to Hide/Show the Application Bar.
*Using Remote Operator
In Favorites or Groups, a PLC marked with a green hand is active. Access it remotely by tapping it.
During a session, your mobile screen displays the PLC's HMI panel, along with a red Application Bar.
This Bar shows (from left to right):
- Connected PLC name
- Connection duration
- Buttons:
> Switch modes: View Only /Full Control. Disable/enable buttons and touch properties on the HMI panel displayed on your mobile
> Set Refresh rate (seconds)
> Pause Remote session
> Exit Remote session
**PLC Information
To view /edit, tap i:
PLC Communication
- To edit details, tap fields; set View mode: View Only/Full Control.
- Check the PLC Connection.
PLC System Info
- When connected:
Tap Get PLC Information to view PLC OS data.
- When not connected:
Shows details of last session.
PLC Location Info
- Tap to enter data: location, contact details, comments, edit the PLC’s group.
- Delete PLC from Favorites: uncheck Add to Favorites.
*Application Settings
Tap More to show Application Bar if hidden, then tap Settings button.
Startup Page: Remote Operator automatically loads/checks communications for all PLCs on Startup page
Sharing Settings:
1. Tap Share, follow instructions to send the file Share.unitronics.
2. When Share.unitronics is received on the second device, tap to open it. Remote Operator opens the Share file.
Remote Operator MUST be installed on the receiving device.
How to install Unitronics’ Remote Operator APK for Android [menu]
Download Unitronics’ Remote Operator APK file (com.unitronics.remoteoperator_16_24385703.zip) from SameAPK.com, then follow these steps:
Update Phone Settings
- Go to your phone Settings page
- Tap Security or Applications (varies with device)
- Check the Unknown Sources box
- Confirm with OK
Go to Downloads
- Open Downloads on your device by going to My Files or Files
- Download Split APKs Installer (SAI)
- Download and unzip file you already downloaded (com.unitronics.remoteoperator_16_24385703.zip)
- Open Split APKs Installer and follow steps on this app.
- Tap Install when prompted, the APK file you downloaded will be installed on your device.
How to install Unitronics’ Remote Operator APK on Windows 7/8/10 or MAC PC? [menu]
Download Unitronics’ Remote Operator APK file(com.unitronics.remoteoperator_16_24385703.zip) from SameAPK.com to your PC (ex: /Users/xxx/Downloads/(com.unitronics.remoteoperator_16_24385703.zip)), then follow these steps:
Using Emulator:
- Download And Install one Emulator Softwares (Ex: Bluestacks, GenyMotion, NoxPlayer)
- Download and unzip file com.unitronics.remoteoperator_16_24385703.zip.
- Using ADB or Split APKs Installer same as install for Android.
Unitronics’ Remote Operator APK Pros & Cons [menu]
Pros
- This app is safe, it's not require high risk permissions
- Compatible with 64-bit device (some android device and current Bluestacks)
Cons
- No best performance On PC (Windows, MAC) (because it's not exists X86 variant)
